How to reset error code P07 on Canon PIXMA MP258?

Was this answer helpful? Yes | No

remove chip in catridge .and install software fix scx4623

Was this answer helpful? Yes | No

how do i reset my panasonic kx mb262cx printer

Was this answer helpful? Yes | No

Someone said: replace the toner

in which hole the ink should be injected in color cartiridge

Was this answer helpful? Yes | No

Pliz give a straight-forwad answer. Theres no reset button below the power power whatevr. frustrated

Was this answer helpful? Yes | No

there are no resume button in my printer what should i do ?

Was this answer helpful? Yes | No

To ignore the empty message on Canon iP4600 or iP4700, just press and hold the Resume(paper) button for 5 seconds

Was this answer helpful? Yes | No

In order to refill printer ink in canon ip 3500 reset printer chip, make sure to buy the refill ink kit suitable to the particual model of the canon printer. Follow the steps given in the kit. Jack sullivan

Was this answer helpful? Yes | No

How to Refill a Kodak Ink Cartridge X Chris Moore has been contributing to eHow since 2007 and is a member of the DFW Writers` Workshop. He received a Bachelor of Arts in journalism from the University of Texas-Arlington. By Chris Moore, eHow Contributor Like any other printer ink cartridges, replacing those for a Kodak printer can be annoying and sometimes costly. Refilling an old cartridge with new ink, whether it`s a basic black or color cartridge or even one for a photo printer, can save you a lot of hassle. A big reason is that you can probably find a decent refill kit at the corner drugstore rather than traveling to the computer or electronics store. The kit will probably cost less than a cartridge and can be used several times. Difficulty: Easy Instructions things you`ll need: • Syringe bottle • Bottles of new printer ink • Drill (black cartridge) • Sharp knife (color/photo cartridge) • Toothpicks (color/photo cartridge) 1. o 1 Open up the cartridge to reach the ink chamber within. For color and photo cartridges, just remove the lid with a sharp knife (insert it where the black and colored plastic meet) to find the three fill holes. On black cartridges, make a hole with a heated pin or drill on top of the cartridge where the letter "K" is. o 2 Check the chambers in a color/photo cartridge to determine which color ink is in which chamber. Insert a different toothpick or pin into each chamber to draw out yellow, cyan or magenta ink. o 3 Fill a plastic syringe bottle with enough ink in the color you are refilling. A black ink cartridge should need 10 to 15 milliliters. A color/photo cartridge takes 5 milliliters of each color. o 4 Insert the syringe needle into the cartridge, sending the tip down to the bottom. The chamber contains a sponge, so you will need a small bit of force to push it in. o 5 Inject the ink into the cartridge. Unlike other brands of cartridges, you want to saturate the sponge with ink in a Kodak cartridge. Depress the syringe plunger slowly until you can see the ink begin to surface on top of the sponge. o 6 Wash all ink residue out of the syringe after you`ve refilled one shade of ink. If you intend to refill another color immediately, dry the syringe out first. o 7 Replace the lid on a color/photo cartridge. Apply a strip of tape to the spot where you first removed the lid to secure it. You don`t need to seal a hole you drilled in a black cartridge. o 8 Leave the cartridge standing in a secure spot overnight. This helps the ink settle within the cartridge for even printing once the cartridge is back in the printer. Read more: How to Refill a Kodak Ink Cartridge | eHow.com http://www.ehow.com/how_4744462_refill-kodak-ink-cartri... Protect the surface you are using from spills by spreading out old rags or paper towels Read more: How to Refill a Kodak Ink Cartridge | eHow.com http://www.ehow.com/how_4744462_refill-kodak-ink-cartri... How to Reset a Kodak Color Ink Cartridge Chip X Joanne Cichetti has written articles and Web content professionally since 2009, focusing primarily on health and lifestyle. In order to further pursue her writing career professionally, Cichetti inducted herself in the Long Ridge Writers Group, and she looks forward to having a novel published under their guidance. By Joanne Cichetti, eHow Contributor updated: May 06, 2010 Kodak printers are known for their superior printing results. When the printer runs out of ink, you have to replace the cartridge, but colored ink cartridges can cost a lot of money. Thus, many people prefer reusing their old cartridges after refilling them. However, after you refill the cartridge, you have to reset the cartridge chip to allow it to work with the refilled cartridge. Difficulty: Moderately Easy Instructions things you`ll need: • Chip resetter • Towel 1. o 1 Go to a computer hardware store and buy a chip resetter for your Kodak color cartridge. Make sure it is compatible with your particular cartridge model. o 2 Gently wipe the chip area on your cartridge. Some models have the chip at the bottom of the cartridge while others have it at the side. Use a soft cloth or a towel for cleaning. o 3 Clip the tiny chip resetter into the cartridge chip. While clipping it, keep the resetter in an upward position. o 4 Find the tiny button on top of the Kodak chip resetter. Press the button and hold for a few seconds. The cartridge`s OEM settings will be restored to default and the ink level will be recognized as full. To take off the resetter, press and release the resetter clip. • Chip Resetterwww.RefillBay.com Reset Epson cartridges for $8.90 - Free Shipping. • CLI-221 Chip Resetterwww.FillServ.com Only $19.95. Refill and Reset your OEM CLI-221 or PGI-220 cartridge. • Ink Cartridges - HPHP.com/InkCartridges Use Original HP Ink Cartridges. Get Up to 65% More Pages than Refills! • Cartridge Resetterwww.123refills.net Chip reset device, works unlimited times. Reset smart chips Read more: How to Reset a Kodak Color Ink Cartridge Chip | eHow.com http://www.ehow.com/how_6148548_reset-color-ink-cartrid... If the resetter does not work, try the entire procedure another time. If it still does not work, you may have a faulty cartridge, in which case you will have to purchase another one Read more: How to Reset a Kodak Color Ink Cartridge Chip | eHow.com http://www.ehow.com/how_6148548_reset-color-ink-cartrid...

Was this answer helpful? Yes | No

pull the label off on swap it out with another RFid tag.

Was this answer helpful? Yes | No

Someone said: How many times will this work?? replacing XL105 with XL100 rfid tag...