Was this answer helpful? Yes | No

in which hole the ink should be injected in color cartiridge

Was this answer helpful? Yes | No

In order to reset hp 350 chip, the user should first remove the printer`s memory chip battery and insert it again at the same place.After that, the parameters of the printer driver should be set again in order to reset the hp 350 chip. Tedd Doubtson

Was this answer helpful? Yes | No

The removal of the ink cartridges is not a complicated process at all because you just have to open the head of the printer manually by your hands. before that switch on the printer so that the cartridges come before you. then you can manually take out the cartridges from the cartridges holders and then do the refilling or what ever you like. you can find the same instructions on the manual of the printer also. have a look at them and do it yourself. thanks

Was this answer helpful? Yes | No

In order to remove the 5200 error in your canon printer , check out the manual that you would have received when you bought your canon printer . In case you have missed it , check out the manual available at the official web site of canon .

Was this answer helpful? Yes | No

Those 2 idiots must be butchers who never have had a printer, retarded faggots.

Was this answer helpful? Yes | No

If you have the HP 6500, you might try (on the control panel of the printer itself) press the setup button, select Preferences then select Cartridge Chip info, press the 1 key on the number key pad (on the printer itself) that will turn of the usage information collection. Although you probably will lose the cartridge levels info, at least you can refill the cartridges and they should work. I hope this helps, it did for me.

Was this answer helpful? Yes | No

I figured it out!!! Take the RFID chip out find the black square on the front about 3/16 by 3/16 of an inch. Find the 2 wires in the board that complete the connection between that square and use a knife on the chip to break the connection between both sides of the square. Your printer should then show the black ink is full. It has worked for me for awile now. I thought i would pass it on to save you all some money. REFILL the ink don`t buy new.

Was this answer helpful? Yes | No

The HP DeskJet 920 C printer has no chips that prevent printing after refilling. If a warning appears, just ignore it. There may be software apps that make it go away. However, the hp 920 cartridge (also known as HP CD973AE) does have a chip. Ben Norrington

Was this answer helpful? Yes | No

In order to remove ink from cannon pixma printer , the person would be required to open the upper covering of his cannon pixma printer and take the ink cartridge from the printer out and replace it with new ink cartridge.

Was this answer helpful? Yes | No