what does it indicate the light of the color ink & black ink blinks?

Was this answer helpful? Yes | No

how do i reset my panasonic kx mb262cx printer

Was this answer helpful? Yes | No

Someone said: replace the toner

For resetting the ink lever in canon pixma mp 250 is very simple. the main thing which has to be followed is that you have to disable the ink level monitors after you refill the ink cartridges. then you can see and check the ink levels thrugh the provided software. Bill.Gagnon

Was this answer helpful? Yes | No

Someone said: Thank you. You saved my day.

RIght beneath where it says canon, between the scanner bed and the paper output tray, you can just lift the entire scanner bed up. I had to have the printer powered on when I lifted the scanner bed to get the print head holder to slide to the installation position. There are tabs on the ink tanks, which need to be gently pushed forward so the ink tanks can just pop out.

Was this answer helpful? Yes | No

Someone said: thanks for that info. it was helpful

Someone said: thank you.

Someone said: thanks alot great help.

w.jianhong said: Thank you so much! I got it!

Someone said: thank you so much

the question arrises that why do you want to dismantle and disassemble the printer. are you interested in becoming a professional then you should do it under the supervision of instructor so that you can reassemble safely and the operation is in safe hands. if you still want to disassemble by yourself then take the manual with you and follow the instructions and if you are genius then you can do it without any problem. so get it done safely dude otherwise the operation will make your operation dismantle forever Bill.Gagnon

Was this answer helpful? Yes | No

You can get more information on the net but i would help you.To Reset Waste Ink Counter On Canon Pixma MP145 Connected Printer To A Power Under Canon Printer Cartridges For Canon Pixma Mp145 Cara Reset Mp.Refer fixya.com for more information.

Was this answer helpful? Yes | No

In order to replace the ink cartridge for canon mx330, first of all open the cover of your canon mx330 printer and take out the old cartridge. Get the canon mx330 refilling kit and refill the cartridge by using a syringe needle ane keep it back. Jack Sullivan

Was this answer helpful? Yes | No

Someone said: I don't know when the ink cartridge is location on the machine.

I have no idea what yours will cost to fix. To find out, see the body shop and get an estimate.Armed with that information, look at your insurance policy. Do you have collision coverage? If not, stop. You are not covered. If yes, what deductible amount did you choose?Now do the math. If you have $700 in damage, and a $1,000 deductible, it wouldn`t make sense to claim.Generally if it would pay to claim it, the increase if any would be less than you would pay out of pocket to do the repair yourself.

Was this answer helpful? Yes | No

Hi I have a MX340 canon printer purchased recently, and he ran out of black ink and made a charge, but always comes recommended to change the black cartridge, I pressed the reset button (small circle with a triágulo inside) to disappear but always get the message and LED screen when you press the fax button I get the color cartridge filled with 2 bars of 3 but the black cartridge set with 3 white bars, well not a problem for printing, scanning, photocopying and to send faxes, but can not receive faxes, BECAUSE THESE ARE IN MEMORY OF THE PRINTER AND LCD SCREEN AS SHOWN TO BE CHANGING THE BLACK, NO print received faxes in any case as could resolve this issue, I tried everything, even the IPTO and mptool but do not do, please be grateful if you could give me a solution. 5b415a0a74765006f122f979f487f751 Thank you very much.

Was this answer helpful? Yes | No

please follow the steps with screwdrivers 1. Unplug the printer (NO power or any connection) 2. Flip the whole thing Up side down 3. At the bottom, you can see there are screws 4. they are for the generator of the power supply 5. Take them away 6. And slowly take away the "brown" box” 7. Then you will see a power cord links with printer 8. Use a very small driver to release it with real care 9. Leave it for 30 minutes 10. Put it back together .... done After that Also, from other, but work.... The reset procedure (for canon MP130) is:- Turn on the machine (1) Press MENU (2) Press SCAN COPY SCAN to enter service mode (3) USE > to got to NVRAM ACCESS (4) set ABS-M LEVEL to 0 (5) set ABS-P LEVEL to 0 (6) Press STOP to EXIT DONE ! Hope this helps

Was this answer helpful? Yes | No