OK ppl i found the answer to this problem. i love my canon MP250 printer. ink levels gets released if you do this. once your ink level runs out and you get the warning that ink is empty. and your only option is to cancel printing. do this: hold down your reset button for 5 or more seconds. this will releas your pc from detectiong ink levels for that cartrige. same works for black and color cartrige. you wont get any ink levels but hey you can refill the cartriges and print. just watch your print outs for ink thats getting finished. and thats it. if you read your warning message that your PC gives you for a empty cartrige it actually explains what i just said. if any one knows how to reset the software to show you how much ink is in the refilled cartrige. please let me know. JUST BY THE WAY MPTOOL DOES NOT WORK FOR CANON MP250. SO DONT WAIST YOUR TIME DOWNLOADING THAT SOFTWARE. please give me feed back to my answer.

Was this answer helpful? Yes | No

how to fix canon printermp258 error E05

Was this answer helpful? Yes | No

I refilled the cartridge and put it in the printer but it doesn`t come up with a "empty cartridge message". And it has stopped printing. How do I get around this problem?

Was this answer helpful? Yes | No

How to reset error code P07 on Canon PIXMA MP258?

Was this answer helpful? Yes | No

Actually, the easiest way is to replace canon printer cartridges color, but there are other ways, namely, How Reset Canon PIXMA MP 250 error 5200: •The printer is turned off and plugged the power cord. •Press the button STOP / RESET and hold, then press and hold the POWER button. •POWER button is pressed, release the STOP / RESET, then press the STOP / RESET 2 times in a state of the power button is pressed. •Release both buttons simultaneously. •The printer will proceed in a while (a while), then the LCD panel will show the number zero (0) •The computer will detect NEW DEVICE, Ignore it ….. •Press the power button, then the printer will die. •Press the power button again, then the printer will be lit and ready for use. If the power cable unplugged, then the above steps must be repeated again. Good luck,

Was this answer helpful? Yes | No

Was this answer helpful? Yes | No

kode p 03 apa ya ...

Was this answer helpful? Yes | No

error p08 is wasted ink full reset the printer press reset button and hold then press on relase and press twice reset button is now in maintenance mode to reset wasted pad ink press 4 times the reset button then turn the printer button on/off sorry my english

Was this answer helpful? Yes | No

I need to scan to a file so I can get this on facebook, how is this done?

Was this answer helpful? Yes | No

The reset button on a canon mp250 printer is used to reset the printer after refilling the ink cartridges. It can be identified as a small button having a red circle with a triangle in it and 2 black slash lines up above it. Jack Sullivan

Was this answer helpful? Yes | No