Reset can be done once your printer is on Service Mode: a. Switch Off the Printer b. Hold the Resume Button c. Switch On and Hold the Power Button d. Release the Resume Button e. Press the Resume Button Twice f. Release the Power Button By this time your printer is in service mode already. Run the Service Tool Program (Resetter): http://hotfile.com/dl/28164016/37b9cb4/ ... 0.rar.html Select EUR as the Region (depends on your location) Set Clear Waste Ink Tank, select Main & Platen Click Cleaning 1 (Printer will print) Then Click Main and Platen Canon iP3600, iP4600, MP190, MP240, MP260, MP480, MP540, MP620, MP630, MP980

Was this answer helpful? Yes | No

Was this answer helpful? Yes | No

what does it indicate the light of the color ink & black ink blinks?

Was this answer helpful? Yes | No

HOLD DOWN THE STOP BUTTON :)

Was this answer helpful? Yes | No

The reset button on a canon mp250 printer is used to reset the printer after refilling the ink cartridges. It can be identified as a small button having a red circle with a triangle in it and 2 black slash lines up above it. Jack Sullivan

Was this answer helpful? Yes | No

To refill the ink cartridge on canon pixma mp 258 printer , the person has to simply open the printer cover . Place out the empty ink cartridge ands get it refill by using syringe needle . Locate the refill ink cartridge in holder and close the cover .

Was this answer helpful? Yes | No

For resetting the ink lever in canon pixma mp 250 is very simple. the main thing which has to be followed is that you have to disable the ink level monitors after you refill the ink cartridges. then you can see and check the ink levels thrugh the provided software. Bill.Gagnon

Was this answer helpful? Yes | No

resetting cartridges for Canon pixma mp250 after refilling is easy to do. To reset cartridges for Canon pixma mp250 after refilling,the resume paper feed buttom should be pressed for 10 seconds. Tedd doubtson

Was this answer helpful? Yes | No

press and hold resume paper feed button .....for 10 seconds. the one with the red triangle on it.

Was this answer helpful? Yes | No

the question arrises that why do you want to dismantle and disassemble the printer. are you interested in becoming a professional then you should do it under the supervision of instructor so that you can reassemble safely and the operation is in safe hands. if you still want to disassemble by yourself then take the manual with you and follow the instructions and if you are genius then you can do it without any problem. so get it done safely dude otherwise the operation will make your operation dismantle forever Bill.Gagnon

Was this answer helpful? Yes | No